2012 Newhouse project #20121353 | school bike shelter
- Overview
- Collect Info Completed
- Brainstorm Ideas Completed
- Develop Solutions Completed
- Final Design Completed
Welcome Chicago Public High School students!
These are the instructions for entering a project in Division 6 for the 2012 Newhouse Architecture Competition.
Bike racks and bike rider amenities are given little attention when schools are planned, and bike riders have little infrastructure support for their choice to ride to work or school.
In order to support healthy lifestyles we are asking you to design a bike shelter that will provide safe and secure storage, protection from Chicago weather (year around), and some amenities that would be helpful for bike riders to have when they reach school.
The project will either replace your existing bike storage area OR you can find a new location that would better serve the school. You must identify and justify the new location (eg. - visibility is better, or there is more room to maneuver).
Around curie's community there are many people that ride their bikes. Curie High School has an empty room with a big space that is not being used right now. what i want to do is take everything that is not being used out of the room and divide the room into different sections so that each section can have a certain amount of bikes stored so that they are not piled up together. I also want to to create a place where poeple can now that there property is secured and safe. with these project i think that many people not only the students from curie but the community would also be benefited from it.
In the Collect Info step of the design process, you try to gather as much information as possible about your school's existing bike storage facilities, along with the students and staff who will use it. You can't propose new solutions until you figure out and document what the existing problems are.
Try This
- Do a site visit of your bicycle parking facilities and make notes, sketches, and take photographs. Note conditions that are unsafe, unsecure, or that are less than ideal.
- Look at other schools or public facilities to determine good / bad examples of how bikes are stored and if anything is done to accommodate riders needs when they get off their bike.
- Interview bike users and ask them what they would like to have in a bike shelter at their school or place of work.
- Calculate the number of bikes that park over a week, also inquire if bikes are registered with the main office and if so how many are registered with the school.
- Do an analysis at different times of the day and week and create an analysis with average usage and high / low points. Also determine if there are more bikes at the beginning of the week or end of the week.
- Measure and draw the existing bike parking area and locate and note existing structures such as fencing, bike rack (notate the type and material), show the size of a bike and its clearances on the plan. Include dimensions.
My work for the Collect Information step:
I collected information by taking pictures of the room from every point of view, going to visit the room, and having a survey to see how many people ride their bikes to school.
In progress
In the Brainstorm Ideas step of the design process, you put some early ideas down on paper that show what you've found in the Collect Info step.
Try This
- As you are observing and making notes think about how your bike shelter is taking shape. Make side notes of where new elements may go or how you would change what is currently in place.
- Take note of unsafe conditions or conditions that do not make sense (For example, bicycles sticking out into a sidewalk or people having difficulty parking their bikes).
- Sit and study photographs of your site visit. If you can print and write comments of what you remember and note where you might change things and how.
My work for the Brainstorm Ideas step:
I drew some sketches of the room, and i made the meausrements of the of each side of the room too.
In the Develop Solutions step, your rough ideas come together with drawings and models that can show others your solutions for a new bike shelter.
Try This
- Try out different ideas and save each “version”. You do not want to lose a good idea later! Other people viewing your project - other students around the country, your teacher, and mentors - want to see how your ideas have changed over time. This means that while you're working on your digital model, you’ll want to be sure to keep re-saving it with a new file name every few days as you work through the steps.
- Make a list of your ideas and associated sketches, or practice models. For your final upload you will want to write a short but effective paragraph of your process and what you found. This will inform the direction you will take for the final solution.
- Show your ideas to your teacher and peers for some feedback. You can also review your progress with the test group you may have interviewed and test whether your design would meet their needs or address their concerns. Learn from the feedback you receive and incorporate into your final design solution.
- Be sure to check out and make comments on other student bike shelter projects. Post a link to your project on your Facebook account.
- Review your design and test it against your own observations and review that it has met the project requirements. Did it meet the expectations of the end users that you spoke to?
- Do not leave work for the last minute! Going through a detailed design process requires time to gather information, develop ideas, and make improvements. This is difficult or impossible if you try to pull everything together a week before your project is due. Projects that are researched, developed, and well executed will always stand out!
My work for the Develop Solutions step:
My space for the bike shelter at my school exceeds 1000 ft. the space that i chose is currently being used for in school suspension. It is 2500 sq ft. based on the survey of the community residence, students and school faculty, the space would not only serve the school, but also the community and riders of the orange line.
The final step of the design process is to create more finished drawings that illustrate your ideas to others. Remember, your explanation text, and the types of drawings, images, and models you share need to tell the whole story of your project to someone who may or may not have ever visited your school.
Be sure that you understand and meet all schedule deadlines and project data submission requirements.
The Newhouse Competition judges will be evaluating your design project on:
- The creativity of the final solution.
- If you have included all studies, observations, data, and calculations utilized for determining capacities, design considerations, and scale of final project.
- How well you showed the design process through sketches, notes, pictures, etc.
- How well your projects incorporates the following components:
Secure bike storage using common bike parking structures (bike racks), or some type of creative structure that is an “improvement” to what is currently installed and utilized at the school.
Shelter from the weather – it can be enclosed or partially enclosed.
Basic amenities: clean up or private shower facilities, personal lockers, small food kiosk or beverage bar, considerations for self performing bike maintenance, bike storage, information board(s).
Consideration for use at all hours and seasons.
My work for the Final Design step:
The room that I'm using for the bike shelter is located at my school, the room doesn't have anything inside. What i did to this room is that i took off the poles that were in the middle, so that the room can have more space to put bikes, and change the floor, i also change the color of the room so that the room had a better view. In the room i placed bike racks on one wall of the room and the middle. The room that i'm using for the bike shelter has a little room inside, i used this little room for a bike repair shop for people that needed bikes to be repaired and other things that they also may need. What i want with these project is for people to have a place where they know that their bikes are safe, and also have their bikes repaired
Comments
You should have more than two sketches. You have not made any progress during the past week. You need to use your time more wisely.
Just a friendly reminder, you must upload photos and text for each step of the design process to be eligible for judging in the competition. Good luck!